Tag: open day

Open event: T-shirt bleach-stenciling

Saturday 25th May 2024, 12-2pm

Hosted by Avery and Cassian. Bring 100% cotton t-shirts new and old that you’d like to enhance with a DIY industrial aesthetic. It’s very simple and easy and fast! You can use some nerdy stencils pre-made by Avery, you can cut stencils yourself in cardboard, and if it’s not too busy we might be able to help you make a more detailed, reusable stencil from plywood with the laser cutter.

You will need to bring:

  • Any clothing that you would like to try bleach-stencilling, must be over 95% cotton.
  • Designs that you would like to turn into stencils – PNG or SVG files for laser cutting, printed or drawn onto paper for cardboard stencils.
  • A corrugated cardboard box, with as little ink printing on it as possible.
  • A face mask, if you are sensitive to strong smells.

We will provide:

  • Rubber gloves
  • Bleach spray
  • Sharp craft knives for cutting stencils

Warnings:

  • Your fabric must be >95% cotton, or the bleaching won’t work well/at all!
  • This craft uses bleach, and there will be strong bleach smells throughout. We will be ventilating the space by opening the front and back door to encourage air flow, but the air will still be quite bleachy. You might have a better time wearing a really good face mask, if you’re sensitive to that kind of thing.
  • The bleach may land on your clothes and cause discolouration that can’t be undone. Wear clothes that you don’t care about that much.
  • We will be using sharp craft knives. We’ve got first aid supplies and plasters just in case.

As it’s an open day, Machspace will be open to the public and free to attend. We invite you to read our open day rules before attending.

We look forward to seeing you there! 🙂

Facebook event: Click here

Event: Open day, theme lino-printing

Saturday 16th March 2024, 12-2pm

Image credit: Wikimedia Commons

This open day will be led by Pat, who has experience with a similar community workshop focused on printing. She’ll teach us how to cut a design into a small square of lino, and then print it onto paper. You’ll also have the option of turning your print into a badge with our badge maker.

As it’s an open day, Machspace will be open to the public, and we invite you to read our open day rules before attending.

We look forward to seeing you there! 🙂

Facebook event: Click here

Open day: hand stitch

Saturday 2nd March 2024, 12-2pm (public, drop-in)

Join Penny and Cassian at Machspace for our Hand Stitch Open Day!

Bring your own project or choose from:

  • Fun cross stitch patterns and kits 
  • Learn ‘painting with thread’ using long-and-short stitch
  • Make an embroidered rose
  • Bring your mending project and create a decorative mend
  • Use our interaction badges – choose to craft quietly or stitch ‘n’ socialise
Image via LovemeoksEmbroidery on Etsy. Pattern will be available to stitch on the open day.

Here’s a few of the cross-stitch kits we’ve bought to share, pay-what-you-feel:

Some of them have beads too!

Plus we have a whole selection of embroidery hoops to go with them, so you can join in even if you’re a complete beginner. We also now have one of those giant magnifying glasses with LEDs on it, which clamps onto the table, like so:

As it’s an open day, Machspace will be open to the public, and we invite you to read our open day rules before attending.

We look forward to seeing you there! 🙂

Open day: zines and badges

Image credits, L-R: Machspace, GM Zines (Wikimedia Commons), David Silver

The next open day has a dual theme, two crafts that go together like cheese and pickle.

A zine (pronounced “zeen”) is a homemade booklet, often copied by photocopier, with big counterculture vibes. Informative or arty or silly or serious, they’re versatile and limited only by your own imagination. At this open day we’ll teach you how to make a mini zine using just an A4 sheet of paper, no staples required, and then you can copy it using the Machspace inkjet printer-scanner.

Our badge maker was one of the first things we bought for Machspace, and we’re very proud of it! Put your art into the die with all the right layers, crunch the handle, and voila, now it’s a proper badge. From brain to badge in 3 minutes! Very satisfying. We can do 25mm and 45mm badges.

It’s a drop-in for members and non-members (ages 11+), so feel free to pop by anytime between noon and 2pm. If you’re into the theme you can bring your own art supplies and stickers and washi tapes. Machspace can provide printer paper and printer ink. And you’re very welcome to bring anything else to make instead, or just come to hang out and drink tea.

It’s free to attend, and food, drinks and materials are free – donations welcome but not required.

If you have any questions, feel free to email us: hello AT machspace DOT org

Open day: knitting

Our first open day of 2024 is on Saturday 6th January, 12-2pm – and as you can see, this time we’ve picked a theme. Avery and Cassian will be hosting, and they knitted all the items above. They can help you get started, and they can probably help you with knitting pattern questions or advice with mistakes, too.

It’s a drop-in for members and non-members (ages 11+), so feel free to pop by anytime between noon and 2pm. If you’re into the theme you can bring your own knitting project(s), or learn the basics from Cas and Avery. Machspace has a stash of donated yarns and a collection of knitting needles, or you can bring things with you. And you’re very welcome to bring anything else to make instead, or just come to hang out and drink tea and eat leftover mince pies.

Please be aware that you can take yarn away with you afterwards, but you won’t be able to take Machspace knitting needles with you. (We recommend checking out the local charity shops, who often have a good supply of knitting needles for cheap, but they usually keep them behind the counter and you have to ask at the till to have a rummage.)

Progress report: two months

The kitchen has new teas and hot chocolate and LOTS of snacks, and a supply of small cartons of cow and oat milk. Also we’ve 3D-printed two towel holders (about 45 minutes each) for the kitchen:

Our t-shirt stencil bleaching went well:

And then we had our festive open day, complete with decorations, mince pies, and shortbread with Christmassy decorations, which was well-attended enough that I was too distracted to get photos of attendees:

And today, we finally got around to replacing the 15 missing and broken lightbulbs!

Event: Winter Holiday Open Day

Wednesday 20th December 2023

6pm – 9pm (drop-in, open day)

This open day is a little longer than usual, because of the festive season!

We’ll have mince pies, hot beverages, and spiced berry cordial (hot or cold). You’re invited to bring sweet and savoury snacks to share, and festive crafts to work on together. Tell us in advance if you have any dietary requirements, so we can make sure there’s stuff you can eat and drink.

With any luck we’ll have been organised enough to get some decorations up! Any members who would like to mastermind any decorating sessions are invited to email us: hello AT machspace DOT org

Who can come?

  • Any adult (18+), regardless of whether or not you’re a member.
  • People aged 11-17, accompanied by one responsible adult each.
  • Assistance animals, provided they can sit quietly beside their human throughout the visit.

It’s free to attend, and food and drinks are free – donations welcome but not required.

Progress report – one month

Our grand opening was on 20th October, and today, almost a month later, we have 14 inducted members and 16 people waiting to be inducted.

We have storage space for members’ projects now:

We’ve also got some posters for members to tell us about what equipment they’d like us to get (some since acquired), and – as we have very limited funds for equipment – a very offline way to informally crowdfund for particular items:

And, since the poster thing has been turning out so well, we added another for sharing materials and coordinating skill-sharing:

Members are invited to write on this poster if they want to teach others how to do their favourite crafts, or if there are particular skills they would like to learn.

Also, our kitchen now has shelves, a sink and a working hot water supply, and a little fridge under the worktop:

Also it’s super duper yellow 🤩

Today’s open day was pretty good, we had a few visitors coming from the repair cafe over the road, and a couple of new members signed up. Cassian and Avery used some salvaged materials (left by the previous pop-up art shop tenants) to create a sandwich board to make the workshop look more open and welcoming on open days:

Things are still pretty chaotic, and occasionally overwhelming, especially with regard to offers of donated items! We have a small space so we have to be quite careful. Also, there are only three volunteers at the moment, with limited time and energy, so we can’t accept anything that needs any kind of mending, maintenance, etc.

We’re sending out emails to applicants once a week or so, to offer time slots for induction, and managing about 3 sessions per week.

Our next open day is scheduled for Saturday 25th November, 12-2pm, but we may not have enough directors/volunteers to manage it – stay tuned! If you want to be sure we’ll be there to show you around, come on Wednesday 6th December, 6-8pm. Open days are intended for everyone, members and non-members alike, to drink various hot beverages and make things together – come along and meet each other!

Membership, inductions and volunteering

Membership and induction

Membership applications have been coming in since the grand opening, and we’ve inducted several people already, which means people are using their key fobs to access the makerspace whenever they want! We love it.

If you’d like to join, please fill in the membership application form here. And if you’ve already done that, you might have an email inviting you for an induction – get in touch at hello AT machspace DOT org and we’ll find a date and time that works for you. We have availability in the afternoons and evenings most days of the week at the moment, with mornings (hopefully) coming soon.

Open days

We’ve figured out our open day sessions! You can find them on our calendar page here. In summary, they’re Wednesday evenings and Saturday lunchtimes, with one every two weeks or so. The next one is Saturday 11th November, 12-2pm, which coincides with a repair cafe taking place at the Community Hub over the road.

Volunteering

Would you like to help make a makerspace? If so, we would love for you to join in! Machspace is a non-profit run by three volunteers with limited energy and time, so every little helps. Email us at hello AT machspace DOT org and tell us what you’re into!

In particular we’re looking for a woodworking specialist – because woodworking is something a lot of prospective members have expressed an interest in, and none of the directors have much expertise. If you’re proficient with woodworking, carpentry, power tools, etc. and you’re interested in helping out, please take a look at this volunteering “job description”.

We are open!

Yesterday afternoon/evening we held our grand opening, 3-6pm, and we had about 25-30 guests, lots of cupcakes and cups of tea, and many interested people, lovely and supportive comments, etc. It was so busy that we didn’t even get a minute to take any photos – and we ran out of paper membership registration forms and had to start referring people to the online registration form instead!

This afternoon we inducted our first four members, who now have their key fobs and can let themselves into the space anytime. We also inducted someone on the 3D printer, and just because this blog is for reporting the most important information, their test print was a blue rabbit.

For those of you who weren’t able to make the grand opening, if you want to come and see the space in person before signing up for membership we’ll be holding open days every couple of weeks – probably alternating between weekday-evenings and weekend-daytimes. We haven’t chosen the first dates yet but as soon as we have they’ll appear on the calendar page of this website.

And if you already know that you want to be a member, you can join anytime! It’s a two-stage process – first you sign up using our registration form, and then one of us will be in touch to arrange your induction, where you’ll sign the code of conduct and get your key fob.

We’ve also just started sending the rewards out to our crowdfunders, so if that’s you, keep an eye out. 🙂

It is so satisfying and gratifying to know that our first members are now able to use Machspace, laminating stuff and drinking cups of tea and repairing their whatevers and suchlike! Amazing stuff. Thank you everyone for your support, and we hope to see you at Machspace sometime soon!